brand Product Catalog
Position:Home>brand > ABS > Instrument class >
Lapping instrument low temperature type (-30℃)

I. Product introduction
Kz-iii-fp high speed low temperature tissue grinding machine can reach the low temperature environment of -30℃, is the use of vertical vibration system high speed reciprocating movement, so that the grinding tube frozen samples and grinding beads collide with each other, the grinding shear force and impact force caused by the tissue completely broken, It is a special equipment for one-time rapid processing of multiple samples in research institutes, universities, agricultural institutes, biomedicine, food testing and other fields.
Traditional mortar grinding, grinding only one sample at a time, the processing efficiency is low; Moreover, every time tools such as mortar and mortar must be cleaned and sterilized, which greatly increases the workload of sample processing.
High speed and low temperature tissue grinding machine can greatly improve the sample processing process:
1. The samples can be dry grinding, wet grinding and homogenization treatment;
2. Up to 24 samples can be processed at the same time to complete sample preparation quickly and with high throughput;
3. Adapter of different capacity can be replaced 2ml, 5ml, 10ml, 50ml;
4. A wide range of samples can be processed:
A. Suitable for grinding and crushing all kinds of plant tissues including roots, stems, leaves, flowers, fruits, seeds and other samples;
B. It is suitable for grinding and crushing all kinds of animal tissues, including brain, heart, lung, stomach, liver, thymus, kidney, intestine, lymph node, muscle, bone and other samples;
C. Suitable for grinding and crushing of food and drug components analysis and detection;
5. Closed disposable centrifugal tube is used to effectively avoid cross contamination between samples;
6. The experiment has strong repeatability, and the same grinding effect can be obtained by setting the same grinding frequency and time.
7. Refrigeration function: -30℃ to room temperature; Temperature control accuracy: ±1℃.
Two, technical parameters
1. Can process up to 24 samples simultaneously in 1 minute, complete sample grinding quickly, efficiently and with high throughput;
2. There are a wide variety of samples that can be processed, such as plant tissues (such as rice, corn, wheat, beans, peanuts, etc.), animal tissues (such as muscle, small intestine, heart, lung, fur, bone, etc.), microorganisms and various Chinese medicinal materials and drugs, etc.
3. Closed disposable centrifugal tube is used in the grinding process to effectively avoid cross-contamination between samples;
4. Homogenizing speed: 0-70 HZ, the actual speed can reach 2100rpm, working time: 0-99 minutes, users can set;
*5. Preset 10 groups of common tissue grinding parameters to optimize the grinding conditions of different specimens;
6. Noise level: < 65dB;
7. Maximum feed size: no requirement, adjust according to adapter;
*8 emergency stop button: in the process of grinding can be taken at any time, the instrument will stop running, fast and safe;
*9. Fast refrigeration: start the machine in a short time to cool to zero, to prevent degradation, temperature range: -30℃- room temperature;
*10. Electromagnetic safety lock: electromagnetic lock can not be opened during the working process, until the end of the grinding process, the whole process of protection;
11. Grinding method: wet grinding, dry grinding, low temperature grinding can be;
*12. Use the special up and down and left and right shaking 3d integrated vibration mode, the sample in the space is a figure 8 3D movement, grinding more fully, better stability;
13. Optional installation of a 60-hole adapter, upgrade to grinding 60 samples at a time, further improve grinding efficiency.
14. Power demand: 220V single-phase AC, <6A;
15. Overall size: 500*365*370mm;
16. Weight: 55Kg